How to Repair the Refrigerator Door Seal

The majority of refrigerator doors already possess a rubber seal on the inside of the fridge unit. The rubber seal is sometimes referred to as a refrigerator gasket that is used in order to maintain the cool temperature of the inside of fridges. This serves to protect the food. Seals are also commonly used in freezer units as well.

After the refrigerator has been opened and closed numerous times, the seal will inevitably become worn and create gaps that can lead to leakage of cool air whirlpool refrigerator repair pasadena.

This can cause the food to become spoiled and even waste you money on electrical bills. If the seals become cracked, it can also shorten the lifespan of the refrigerator. However, using the correct equipment, parts, and tools, you will be able to repair the seal on the refrigerator and save your fridge as well as save energy immediately.

In order to repair a cracked or damaged refrigerator seal, there are few materials that are needed. These include weather stripping tape, a new refrigerator seal, and a screwdriver.

Once you have all of the materials that you require, the following steps can be used in order to make your fridge as good as new:

Step #1
The first step is to buy the appropriate refrigerator seal for the door. Check the label of the refrigerator that is present within the fridge. It will tell you the measurements and dimensions that are required and may even provide you with a product model number. On the off chance that there is no label within the fridge, measure the seal of the door yourself. Make sure that you replace the seal using the correct dimensions. You can likely buy a replacement seal from any store that sells appliances.

Step #2
Locate the retainer that is attached to the perimeter of the door. Lift the inside edge of the seal and loosen the screws that are used to lock the retainer of the fridge. The seal should slip from beneath the retainer of the fridge. However, make sure that you do not apply excessive force.

Step #3
Slip the seal of the door from behind the liner. Begin to situate the new door seal into the top of the refrigerator. Ensure that you fit the seal around the entirety of the fridge. After the seal is completely in place, make sure that the door can open and close. This will ensure that the seal is properly aligned. Make sure that the screws are thoroughly retightened.

Step #4
Check the door for gaps and twists in the seal. The weather tape should then be used to close any gaps. You can even use a blow dryer in order to shape the seal as well.

Leave a Reply

Your email address will not be published. Required fields are marked *